Mazda 3 Owners Manual: Rear Window Defogger
The rear window defogger clears fog from the rear window.
The ignition must be switched ON to use the defogger.
Press the switch to turn on the rear window defogger. The rear window defogger operates for about 15 minutes and then turns off automatically.
The indicator light illuminates when the defogger is operating.
To turn off the rear window defogger before the 15 minutes has elapsed, press the switch again.
Manual Climate Control
Automatic Climate Control
Dual-Zone Automatic Climate Control
|CAUTION Do not use sharp instruments or window cleaners with abrasives to clean the inside of the rear window surface. They may damage the defogger grid inside the window.|
NOTE This defogger is not designed for melting snow. If there is an accumulation of snow on the rear window, remove it before using the defogger.
Mirror Defogger *
To turn on the mirror defoggers, switch the ignition ON and press the rear window defogger switch .
To sound the horn, press the mark on the steering wheel.
Hazard Warning FlasherThe hazard warning lights should always be used when you stop on or near a roadway in an emergency. The hazard warning lights warn other drivers that your vehicle is a traffic hazard and that ...
Theft Deterrent System Clearing Freeze Frame Data
1. Connect the M-MDS (IDS) to the DLC–2. 2. After the vehicle is identified, select the following items from the initialization screen of the IDS. Select “Body”. Select "Burglar Service Functions". 3. Then, select the following item from the screen menu. ...
Removing a Flat Tire
If your vehicle is equipped with a wheel cover, pry off the wheel cover with the beveled end of the jack lever. NOTE Force the end of the jack lever firmly between wheel and cover, or removal will be difficult. CAUTION Align the notch on the wheel cover with the valve ...
Fuel Injector Inspection [Mzr 2.0, Mzr 2.5]
Resistance Inspection 1. Remove the battery cover.. 2. Disconnect the negative battery cable.. 3. Disconnect the fuel injector connector. 4. Inspect the resistance between fuel injector terminals A and B.