Mazda 3 Service Manual: Roof Molding Installation
Drive Belt Auto Tensioner Inspection [Mzr 2.3 Disi Turbo]
1. Remove the aerodynamic under cover No.2 and splash shield as a single unit.. 2. Remove the drive belt.. 3. Verify that the drive belt auto tensioner moves smoothly in the operational direction. Replace the drive belt auto tensioner if necessary.. 4. Rotate the drive belt ...
Steering Switch Removal/Installation
WARNING: Handling the air bag module improperly can accidentally deploy the air bag module, which may seriously injure you. Read the air bag system service warnings and cautions before handling the air bag module.. 1. Disconnect the negative battery cable and wait for 1 min or mo ...
Liftgate Latch Switch Inspection
1. Disconnect the negative battery cable.. 2. Remove the following parts: a. Liftgate upper trim. b. Liftgate side trim. c. Liftgate lower trim. d. Liftgate latch and lock actuator. 3. Press the latch in using a flathead screwdriver to inspect the latch lever condition. 4.