Toyota Corolla Owners Manual: Towing your vehicle with 4 wheels on the ground
To prevent damage to your vehicle, perform the following procedures before towing.
1 Shift the shift lever to N.
2 Turn the engine switch to the “ACC” position (without a smart key system) or ACCESSORY mode (with a smart key system).
(, 166) Ensure that the audio system and other powered devices are turned off.
3 Release the parking brake.
After towing, leave the engine in idle for at least 3 minutes before driving the vehicle.
■Necessary equipment and accessories
Specialized equipment and accessories are required for dinghy towing. Contact the service branch of the motor home manufacturer regarding recommended equipment.
■Dinghy towing direction
Do not tow the vehicle backwards.
Doing so may cause serious damage.
■To prevent the steering from locking
Vehicles without a smart key system: Ensure the engine switch is in the “ACC” position.
Vehicles with a smart key system: Ensure the engine switch is in ACCESSORY mode.
*: The engine oil capacity is a reference quantity to be used when changing the engine oil. Warm up and turn off the engine, wait more than 5 minutes, and check the oil level on the dipstick. ■ Engine oil selection “Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota a ...
Transmission valve body assy (atm)
Replacement 1. Remove engine under cover lh 2. Drain automatic transaxle fluid remove the drain plug, gasket and drain atf. install a new gasket and drain plug. Torque: 17.5 Nvm (178 Kgf·cm, 13 ft·lbf) 3.