Toyota Sienna Service Manual: Air outlet control servo motor (for rear air conditioning system)
1. INSPECT REAR AIR OUTLET CONTROL SERVO MOTOR
(a) Inspect servo motor operation.
(1) Connect the positive (+) lead from the battery to terminal 4 and negative (-) lead to terminal 5, then check that the arm turns to "FOOT" side smoothly.
(2) Connect the positive (+) lead from the battery to terminal 5 and negative (-) lead to terminal 4, then check that the arm turns to "FACE" side smoothly.
If the operations are not as specified, replace the rear air conditioning blower assembly (rear air outlet control servo motor).
NOTICE: Because the compressor operates at high voltages, wear electric insulated gloves and pull out the service plug to cut the high-voltage circuit before inspection. 1. DO NOT HANDLE REFRIGERANT IN AN ENCLOSED AREA OR NEAR AN OPEN FLAME 2. ALWAYS WEAR EYE PROTECTION 3. BE CAREFUL NOT ...
Door Courtesy Switch Circuit
DESCRIPTION The Multiplex network body ECU detects the condition of the door courtesy switch assembly. WIRING DIAGRAM INSPECTION PROCEDURE 1 READ VALUE OF INTELLIGENT TESTER Connect the intelligent tester to DLC3. Turn the ignition switch to ON and push the intelligent tester ...
Control Module Performance
DTC P0607 Control Module Performance DESCRIPTION This DTC indicates a malfunction in the ECM. HINT: The ECM receives signals from each sensor to control all the functions of the cruise control with the microcomputer.