Toyota Sienna Service Manual: Calibration
1. REMOVE AIR REFINER ELEMENT (a) Release the 2 claw fittings and remove the air filter sub-assembly. (b) Remove the air refiner element from the air filter cover plate. 2. REMOVE COOLING UNIT DAMPER SERVO SUBASSEMBLY (a) Remove the 3 screws and the cooling unit damper servo sub-a ...
1. INSPECT FRONT AXLE HUB BEARING BACKLASH (a) Using a dial gauge, check for backlash near the center of the axle hub. Maximum: 0.05 mm (0.0020 in.) If backlash exceeds the maximum, replace the bearing. NOTICE: Ensure that the dial gauge is set at right angles to the measurement surface ...
1. Remove oil filler cap sub-assembly (A) remove the oil filler cap sub-assembly and oil filler gasket. 2. REMOVE SPARK PLUG (a) Remove the spark plugs. 3. REMOVE OIL PAN DRAIN PLUG (a) Remove the oil pan drain plug and oil pan drain plug gasket. 4.