Toyota Sienna Service Manual: DSP Error/ DSP Error
DTC 62-78 DSP Error
DTC 63-78 DSP Error
HINT: After the inspection is completed, clear the DTCs.
- These codes may be output even if there is no malfunction.
- If these codes are output frequently, replace the radio receiver.
1 CLEAR DTC
- Clear the DTCs
2 RECHECK DTC
- Recheck for DTCs and check if the same trouble occurs again.
OK: Malfunction disappears.
High TemperatureDTC 62-47 High Temperature DTC 63-47 High Temperature DESCRIPTION DTC No. DTC Detecting Condition Trouble Area 62-47 Sensor detects that CD unit temperature ...
Check component status
(a) Compare the test value with the minimum test limit (MIN LIMIT) and maximum test limit (MAX LIMIT). (b) If the test value is between the minimum test limit and maximum test limit, the component is functioning normally. If not, the component is malfunctioning. The test value is usually sign ...
1. REMOVE FRONT DISC BRAKE BUSH DUST BOOT (a) Using soft jaws on the vise, hold the front disc brake cylinder mounting LH in the vise through aluminum plates. (b) Using a screwdriver and hammer, remove the 2 front disc brake bush dust boots from the front disc brake cylinder mounting LH.