Toyota Sienna Service Manual: ON / OFF Indication Parameter Error
DTC 01-E2 ON / OFF Indication Parameter Error
DTC Detection Condition
|01-E2||The signal for ON/OFF control from the master device has a problem||Radio and navigation assembly|
HINT: After the inspection is completed, clear the DTCs.
1 REPLACE RADIO AND NAVIGATION ASSEMBLY
Child restraint systems with a top tether strap (third seat)
Center seat Secure the child restraint system using the seat belt or LATCH anchors. Adjust the head restraint to the uppermost position. Latch the hook onto the anchor bracket and tighten the top tether strap. Make sure the top tether strap is securely latched. ...
Air Inlet Damper Position Sensor Circuit
DESCRIPTION This sensor detects the position of the air inlet control servo motor and sends the appropriate signals to the A/C amplifier. The position sensor is built in the air inlet control servo motor. The position sensor's resistance changes as the air inlet control servo motor ar ...
HINT: When scrapping a vehicle equipped with the SRS or disposing of the steering pad, be sure to deploy the airbag first in accordance with the procedure described below. If any abnormality occurs with airbag deployment, contact the SERVICE DEPT.